¿Cómo desactivo F1 en HP?

How do I disable F1 on HP?

Press the f10 key to open the BIOS Setup menu. Select the Advanced menu. Select the Device Configuration menu. Press the right or left arrow key to select Enable or Disable the Fn Key switch.

Resolution

1. Press the “F2” key to enter system setup.
2. Arrow down to “F1/F2 Prompt on Error”
3. Select “Disable”
4. Press
5. Select “Exit and Save Changes” and press

On the System Setup Main Menu screen, click System BIOS. On the System BIOS screen, click Miscellaneous Settings. Change F1/F2 Prompt on Error to the preferred status. Leave the System Settings and restart the server.

Disable F1 help key with VBA code

1. Hold down the ALT + F11 keys, and it opens the Microsoft Visual Basic for Applications window.
2. Click Insert > Module, and paste the following code in the Module Window.
3. Then press F5 key to run this code, and now, the F1 key has been disabled when you press F1 key.

Enabling FN Lock on the All in One Media Keyboard To enable FN Lock on the All in One Media Keyboard, press the FN key, and the Caps Lock key at the same time. To disable FN Lock, press the FN key, and the Caps Lock key at the same time again.

2. Disconnect all external devices from your computer, unplug the AC adapter from the computer. 3. Remove the battery from the battery compartment.

If new hardware was recently installed in your computer, you may receive the prompt “Press F1 or F2 to enter setup”. If you receive this message, the BIOS needs you to verify the configuration of your new hardware. Enter the CMOS setup, verify or change your hardware settings, save your configuration, and exit.

Wait For ‘F1’ If Error. Common Options : Enabled, Disabled. Quick Review. This BIOS feature controls the system’s response when an error is detected during the boot sequence. When enabled, the BIOS will halt the boot sequence when an error is detected.

1. Navigate to C:/Windows, find helppane.exe, right click, Properties, Security tab, Advanced.
2. Open up command prompt, File, run new task, type in regedit and hit enter.
3. Use a program like Sharpkeys (search it online) to disable the F1 button (not recommended as it will disable the button entirely).

02-01-2013 08:08 AM It depends on what model PC you have. On my 8000 Elite CMT in the advanced settings menu, you can elect to skip the F1 prompt, and to disable POST messages. If yours has the same settings, then you should be able to do the same thing. 02-01-2013 08:16 AM

I do not need the factory front panel nor the interal USB3s or the audio. Basically not having the any of the USB headers or Audio Header connected results in the F1 to Boot prompt due to the board/bios having logic to detect their presence. Mind you the bios options to disable this tragically does not work.

09-21-2016 09:56 AM Hi Bishop2031! I understand that you are having to press F1 every time that you start the system to continue to boot. Generally this should happen only once when you make a hardware change or clear the CMOS.

If the featurebyte field is empty, then you can specify a featurebyte which should match the label on your chassis. If the featurebyte is not empty, you will not be able to change it as it’s a one off thing. Note that the featurebyte is used to control what is installed from the recovery disks.

When a computer starts up with a message like “Drive not found, press F1 to continue,” it means the computer is unable to find the default hard drive it uses when it loads.