¿Cómo configuro mi dirección IPv4?

How do I set my IPv4 address?

Right-click on the network adapter you want to assign an IP address and click Properties. Highlight Internet Protocol Version 4 (TCP/IPv4) then click the Properties button. Now change the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When you’re finished click OK.

Mask – It is a 32-bit binary number that gives the network address in the address block when AND operation is bitwise applied on the mask and any IP address of the block. The default mask in different classes are : Class A – 255.0.0.0. Class B – 255.255.0.0.

Internet Protocol version 4 (IPv4) defines an IP address as a 32-bit number. However, because of the growth of the Internet and the depletion of available IPv4 addresses, a new version of IP (IPv6), using 128 bits for the IP address, was standardized in 1998. IPv6 deployment has been ongoing since the mid-2000s.

IP stands for Internet Protocol and v4 stands for Version Four (IPv4). IPv4 was the primary version brought into action for production within the ARPANET in 1983. IP version four addresses are 32-bit integers which will be expressed in hexadecimal notation. Example- 192.0.2.126 could be an IPv4 address.

To turn IPv4 off go to System Preferences > Network > Advanced > TCPIP. Then on the drop-down list next to ‘Configure IPv4’ select the ‘Off’ Option. Then beneath that, you can set the ‘Configure IPv6’ drop down menu to whatever you want.

Tap on your Settings app, and then tap on “Wi-Fi.” Tap on the “i” with a circle in it to the right of whatever network you’re connected to, and you’ll see your IPv4 address right there-and your…

With an IPv4 IP address, there are five classes of available IP ranges: Class A, Class B, Class C, Class D and Class E, while only A, B, and C are commonly used.