¿Cómo configurar el servidor MikroTik L2TP?

How configure MikroTik L2TP server?

MikroTik L2TP VPN Setup

1. Create PPP Profile. PPP > Profiles > Add New.
2. Create PPP User. PPP > Secrets > Add New.
3. Create L2TP Server Binding. PPP > Interface > Add New > L2TP Server Binding.
4. Enable L2TP Server.
5. Add Firewall Rules to allow IPsec.
6. Edit IPsec default Policy Proposal.
7. Edit IPsec default Peer Profile.

L2TP is a secure tunnel protocol for transporting IP traffic using PPP. L2TP encapsulates PPP in virtual lines that run over IP, Frame Relay and other protocols (that are not currently supported by MikroTik RouterOS).

@karlisi, it is possible to run an LT2P/IPsec server on a Mikrotik behind a NATing device even without tweaking the Windows registry, the price to pay is that the clients then cannot have public IPs directly on themselves.

Mikrotik reference for PPP, and L2TP. As mentioned above, if you’re on the most recent RouterOS firmware, IPSec will be configured correctly so it Just Works™. Of course, I noticed that it hadn’t turned the encryption up to 11 and decided to muck with it.

And, with the right DNS settings, means I can get the benefit of Pi-Hole blocking even when I’m on the road. Configure a Mikrotik router to allow L2TP VPN access for Windows and Android devices. No additional VPN apps should be required on Windows or Android; out of the box providers only. First, we need to configure the router.

Notice that L2TP local address is the same as routers address on local interface and remote address is from the same range as local network (10.1.101.0/24). Next step is to enable L2TP server and L2TP client on the laptop. L2TP client from the laptop should connect to routers public IP which in our example is 192.168.80.1.

VPNs can be encrypted using a number of protocols, including PPTP, L2TP, OpenVPN, and others. We’ll walk you through setting up an L2TP VPN server on the MikroTik OS in this post. The easiest way to remain anonymous on the Internet is to set up a private network.

Go to Adapter Settings > Right-Click VPN Connection > Properties Security > Type of VPN: L2TP/IPSec Advanced Settings> Use Preshared Key for Authentication: Enter your Pre-Shared Key from the your L2TP IPsec Secret (under PPP > Interfaces > L2TP Server). Allow these protocols: Check Only: Microsoft CHAP version 2