¿Cómo elimino la protección contra escritura en una unidad USB usando CMD?

How do I remove write protection on a USB drive using CMD?

Disable write protection using command line (CMD)

1. Connect your write protected SD card to your computer.
2. Right Click on Start.
3. Type diskpart and hit Enter.
4. Type list disk and hit Enter.
5. Type select disk .
6. Type attributes disk clear readonly and press Enter.

If you are experiencing an issue when attempting to copy or delete files on a USB flash drive, there is a very simple solution that will allow you to remove this setting, giving you the capability to modify, copy, or delete any files from your USB drive. To remove the write protection, simply open your Start menu, and click on Run.

Remove Write Protection from USB Drive Windows 10 Insert the USB drive into a USB port on your computer. Press the Windows key + X . Select Run . Enter regedit and select OK . In the Registry Editor, navigate to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Control > StorageDevicePolicies . Double-click WriteProtect to open the Edit DWORD dialog box. See More….

To remove the write protection, simply open your Start menu, and click on Run. Type in regedit and press Enter. This will open the registry editor. The next step is to navigate to the following path: Double-click the WriteProtect key located in the right side pane and set the value to 0.

Disable the Write protection from USB Drives. If you want to disable the write protection settings, simply navigate to the above registry key and delete the WriteProtect registry entry. You may also change the value to 0. This will save you time and effort, if you want to enable the write protection at a later time.