¿Cómo accedo a mi disco duro HP BIOS?

How do I access my HP BIOS hard drive?

Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS Setup menu. Use the Right Arrow or Left Arrow keys to navigate through the menu selection to find the Primary Hard Drive Self Test option.

The “Drive not found, press F1 to continue” error may be tripping because the computer isn’t physically connected to the hard drive. The motherboard and hard drive may have a loose cable connection or the SATA cable and power cable may have worn out.

Check internal hard disk status If the internal hard disk has some disk errors, the “no bootable device found” error might pop out during Windows startup. You can check its status by CHKDSK.exe tool. To do so, you can refer to the method 3 to open Command Prompt window.

1 Start or restart the computer. 2 Press F2 repeatedly during start up to enter the HP PC Hardware Diagnostics UEFI utility. 3 Select Component Tests > Hard Drive > Quick Test . 4 Select drive C: . 5 Click Run Once . 6 Once the test completes, results are displayed on screen. If the drive passes all tests, continue to Procedure 2 .

The computer stops responding and displays this message: Boot Device Not Found 3F0 . The computer boots to the auto repair menu instead of into Windows and reports: Automatic Repair couldn’t repair your PC. The issue may occur due to misconfiguration of the Intel Optane memory.

Step 1. Plug an empty USB drive into a working computer, free download , install and run AOMEI Partition Assistant Standard on that PC. Step 2. Click “Make Bootable Media” on the left side on the main interface, and follow the Wizard to create a bootable USB drive.